Electrical operation - TIM50
The Gorter TIM50 electrical operation is a solution, which can be fitted on any Gorter RHT roof hatch in special sizes. The two powerful electric motors are always fitted as a pair on both sides of the lid.
Operation and control 230Vac
The Gorter TIM50 is a system with two motors and a control unit. As a standard the system is supplied with a compact surface mount keypad and wireless remote control for easy operation.
Electrical installation:
The drives and the wiring must be installed by a certified installer
Electrical operation for linking to a fire alarm systems
Depending on the access door type, the weight of the cover and the application, we can install one or more gear rack drives. These drives are available in 24 Vdc or 230 Vac.
Operation and control 230Vac
This is the simplest system with 1 motor. It can be operated with an integrated or surface-mounted switch, not included.
Operation and control 24Vdc
Operation of one or more drives is controlled by a control box with rectifier that is connected to the electricity network.
Features
- Communication with central alarm system, possibly combined with emergency switch
- Programmable
- Operation control of other objects
- Control by automatic detectors - smoke, rain, wind, fire etc.
- Automatic sequence control of two covers that are overlapping
- Automatic stop in case of unequal load or overload
- etc.
Depending on the features we will recommend a suitable control box type.
Emergency hatches and doors:
It is of life importance that an emergency door opens after a break down of the electrical system. For those reasons a control box can be provided with a built-in emergency power pack.
Electrical installation:
The drives and the wiring must be installed by a certified installer.
